Mash and Boil

Equipment for conducting the mash and boil portions of your brew day. This section includes kettles, stirring implements, false bottoms, stainless steel fittings, valves and other accessories that will help get through the first day of a beer’s life.


  1. AutoSparge



    $69.99


    A flow rate controller for performing a continuous sparge with all-grain brews. The float monitors the liquid level in the mash tun and adjusts the flow of hot liquor to maintain a consistent height. A second float attached to the drain hose allows the hot liquor to pour in above the grain bed with minimal splashing.


  2. Ball Valve, 304 Stainless Steel, 1/2″



    $17.99


    Stainless steel ball valve with 1/2″ threaded ports and a solid welded frame. Use to slow or inhibit the flow of wort from your brew kettle or fermenter. This valve is temperature and corrosion resistant, ensuring a long lifespan. Made from 304 grade stainless steel.


  3. Ball Valve, Stainless Steel, 3-piece



    $28.99


    Stainless steel ball valve with 1/2″ threaded ports and a 3-piece frame. Use to slow or inhibit the flow of wort from your brew kettle or fermenter. The 3-piece frame can be dismantled for an extra thorough cleaning. This valve comes with a locking bit to prevent accidental opening and is temperature and corrosion resistant, ensuring a long lifespan.


  4. Blichmann Floor Burner



    $155.99



    Available in store only.

    A 72,000 BTU / hour burner that combines heating power and efficiency. Quiet and clean burning, this burner performs well even in windy conditions. This burner’s frame is made from heavy stainless construction to make it last a lifetime.


  5. Blichmann Floor Burner Leg Extensions



    $39.99



    Available in store only.

    Extra long legs for the Blichmann Floor Burner. These legs hold the burner higher off the ground, making it easier to reach your brew.


  6. BoilerMaker, 10 Gallon



    $329.99



    Available in store only.

    A 10 gallon stainless steel brewing kettle with a drain port, thermometer, sight glass and lid. The kettle and lid are made from durable, easy to clean stainless steel.


  7. BoilerMaker, 15 Gallon



    $394.99



    Available in store only.

    A 15 gallon stainless steel brewing kettle with a drain port, thermometer, sight glass and lid. The kettle and lid are made from durable, easy to clean stainless steel.


  8. Brew Kettle, 20qt with Lid



    $39.99


    A 20 quart (5 gallon) stainless steel pot for boiling wort. Comes with a stainless steel lid and has gallon markings engraved on the inside for easy measuring. Made by Polar Ware.


  9. Brew Kettle, 30qt with Lid



    $75.99


    A 30 quart (7.5 gallon) stainless steel pot for boiling wort. Comes with a stainless steel lid and has gallon markings engraved on the inside for easy measuring. Made by Polar Ware.


  10. Brew Kettle, 42qt with Lid



    $80.99


    A 42 quart (10.5 gallon) stainless steel pot for boiling wort. Comes with a stainless steel lid and has gallon markings engraved on the inside for easy measuring. Made by Polar Ware.


  11. Brewmometer, Adjustable



    $72.99


    A threaded dial thermometer from Blichmann Engineering. Screws into a 1/2″ threaded bulkhead on a kettle to monitor temperature while mashing or while bringing wort up to a boil. The dial face reads from 45 to 220 degrees Fahrenheit and shows the optimum ranges for many brewing operations. An adjustable body between the probe and the dial can be rotated and bent to almost any angle, making the dial easy to read from any position.


  12. Brewmometer, Solid



    $29.99


    A threaded dial thermometer from Blichmann Engineering. Screws into a 1/2″ threaded bulkhead on a kettle to monitor temperature while mashing or while bringing wort up to a boil. The dial face reads from 45 to 220 degrees Fahrenheit and shows the optimum ranges for many brewing operations. The temperature probe is approximately 3 inches long.


  13. False Bottom, 12″



    $41.99


    A domed, heavy duty stainless steel screen used as part of a mash tun. The screen prevents grains from being sucked out during lautering.


  14. False Bottom, 9″



    $36.99


    A domed, heavy duty stainless steel screen used as part of a mash tun. The screen prevents grains from being sucked out during lautering.


  15. Fermentap Sparge Arm



    $28.99


    A sparge arm used for continuous sparging in an all-grain batch. This set up sits on top of a mash tun and trickles hot liquor just above the grain bed to reduce aeration during the sparge. A small diffuser gently spreads the liquor about evenly, reducing the chances of disturbing the grain bed or causing channeling.


  16. Hop Bags



    $4.99


    Reusable drawstring bag for boiling hops. These bags are made of nylon and are machine washable.


  17. Hop Steeper w/ Chain



    $5.00


    Metal hop strainer with attached chain. Ball shape opens up for hop insertion, then clamps shut to keep solid hop matter contained within.


  18. HopBlocker



    $59.99


    A straining device that fits into a stainless steel kettle with a drainage port. The HopBlocker strains wort on its way out of the kettle, reducing the amount of debris that makes its way into the fermenter. An adjustable shield helps prevent the straining holes from getting blocked up and maintains a steady flow.


  19. Hose, 1/2″ ID High-Temp Silicone, 1′



    $2.75


    1/2″ inner diameter silicone hose. Temperature resistant, this type of hose is used to transfer hot liquids. Useful on a hot liquor tank, mash tun or boil kettle, this hose is also very flexible. Sold by the foot.


  20. Hose, 3/8″ ID High-Temp Silicone, 1′



    $2.40


    3/8″ inner diameter silicone hose. Temperature resistant, this type of hose is used to transfer hot liquids. Useful on a hot liquor tank, mash tun or boil kettle, this hose is also very flexible. Sold by the foot.