Hoses and Splitters

Lines for connecting your CO2 tank, kegs and faucets together.


  1. Barbed Cross 1/4″ Stainless



    $8.50


    For splitting a gas or beer line 3 ways. Use with 1/4″ or 3/16″ ID hose. Made of stainless steel.

  2. Barbed Cross 3/8″ Stainless



    $6.99


    For splitting a gas line 3 ways. Use with 5/16″ hose. Made of stainless steel.


  3. Barbed T 1/4″ Stainless



    $4.99


    For splitting a gas or beer line 2 ways. Use with 1/4″ or 3/16″ hose. Made of stainless steel.


  4. Barbed T 3/8″ Stainless



    $5.50


    For splitting a gas line 2 ways. Use with 5/16″ hose. Made of stainless steel.


  5. Clamp, 1/4-7/8



    $1.25


    Adjustable clamp to tighten hoses to barbed fittings. Larger size adjusts from 1/4″ to 7/8″.

  6. Clamp, 1/8-1/2



    $1.25


    Adjustable clamp to tighten hoses to barbed fittings. Adjusts from 1/8″ to 1/2″. Required for fitting a 5/16″ ID hose onto a 1/4″ barb.


  7. Flare Washer



    $0.45


    Washer for the flare to barb swivel adapters. Place between the nut and the MFL post to create a stronger seal.


  8. Growler Filler



    $9.99


    A 5/16″ x 9/16″ tube fitted to a stainless steel adapter. The adapter supports two O-rings and creates a snug fit inside a standard beer faucet. Used to fill growlers and bottles from a kegerator while minimizing aeration and CO2 loss of the beer. Does not fit Perlick faucets or picnic faucets.


  9. Hose, 1/4″ x 1/2″ x 1′ (Beer or Gas)



    $1.00


    1 foot of 1/4″ inner diameter by 1/2″ outer diameter plastic hose for beer or gas lines.


  10. Hose, 3/16″ x 7/16″ x 1′ (Beer Line)



    $1.00


    1 foot of 3/16″ inner diameter by 7/16″ outer diameter plastic hose for beer lines.


  11. Hose, 5/16″ x 9/16″ x 1′ (Gas Line)



    $1.00


    1 foot of 5/16″ inner diameter by 9/16″ outer diameter plastic hose for gas lines.


  12. Manifold, 2-Way



    $26.99


    Splits a gas line two ways, with a shutoff valve for each. Each split has a 5/16″ Barb that will accommodate 5/16″, 1/4″ or 3/8″ ID hose. Manifolds of this type allow better control of how CO2 is being distributed than Ts or crosses and help to keep hoses more organized. They can be linked together using pipe nipples to create larger manifolds.


  13. Manifold, 3-Way



    $32.99


    Splits a gas line three ways, with a shutoff valve for each. Each split has a 5/16″ Barb that will accommodate 5/16″, 1/4″ or 3/8″ ID hose. Manifolds of this type allow better control of how CO2 is being distributed than Ts or crosses and help to keep hoses more organized. They can be linked together using pipe nipples to create larger manifolds.


  14. Manifold, 4-Way



    $42.99


    Splits a gas line four ways, with a shutoff valve for each. Each split has a 5/16″ Barb that will accommodate 5/16″, 1/4″ or 3/8″ ID hose. Manifolds of this type allow better control of how CO2 is being distributed than Ts or crosses and help to keep hoses more organized. They can be linked together using pipe nipples to create larger manifolds.


  15. MFL to 1/4″ Barb Swivel Nut (Flare Adapter)



    $3.50


    Stainless steel 1/4″ barb to 1/4″ MFL adapter. For attaching hoses to MFL (male flare) Posts. The nut swivels in place for easy removal.


  16. MFL to 1/4″ Barb Swivel Nut (Flare Adapter), 90° Elbow



    $3.99


    Stainless steel 1/4″ barb to 1/4″ MFL adapter. For attaching hoses to MFL (male flare) Posts. The barb has a 90 degree angle to create an immediate, tight turn without crimping the hose. The nut swivels in place for easy removal.


  17. MFL to 5/16″ Barb Swivel Nut (Flare Adapter)



    $3.99


    Stainless steel 5/16″ barb to 1/4″ MFL adapter. For attaching hoses to MFL (male flare) Posts. The nut swivels in place for easy removal.


  18. Splicer, 1/4″ Barb x 5/16″ Barb



    $2.99


    For joining two hoses together. This splicer will connect a 1/4″ ID hose to a 5/16″ ID hose, allowing you to step the hose size up or down a notch.


  19. Splicer, 1/4″ MFL x 1/4″ Barb



    $3.99


    For joining two hoses together. This splicer will connect any hose that is fitted with a 1/4″ Flare nut to a hose with 1/4″ inner diameter.


  20. Splicer, 1/4″ MFL x 1/4″ MFL



    $3.79


    For joining two hoses together. This splicer will connect any two hoses that are fitted with 1/4″ Flare nuts.